Shenzhen Huapai Communication Technology Co., Ltd.
86-0769-39017383
Search
What does the correct installation of the geared motor include?
- Author:
- Origin:
- Time of issue:2019-02-28 09:42
- Pageviews：
(Summary description)Specifically, the correct installation of the geared motor is as follows:
1. Before installation 1. Before the formal installation of the geared motor, the installation shaft must be carefully checked, and the dirt should be cleaned immediately.
2. The suitable operating temperature of the geared motor is 0～40 ℃.
What does the correct installation of the geared motor include?
(Summary description)Specifically, the correct installation of the geared motor is as follows:
1. Before installation 1. Before the formal installation of the geared motor, the installation shaft must be carefully checked, and the dirt should be cleaned immediately.
2. The suitable operating temperature of the geared motor is 0～40 ℃.
- Categories:Technical Guide
- Author:
- Origin:
- Time of issue:2019-02-28 09:42
- Views:0
Specifically, the correct installation of the geared motor is as follows:
1. Before installation
1. Before the formal installation of the geared motor, the installation shaft must be carefully checked, and the dirt should be cleaned immediately.
2. The suitable operating temperature of the geared motor is 0～40 ℃.
3. Carefully check whether the matching size of the hole connected with the gear motor meets the requirements. Generally, we require the hole tolerance to be H7.
4. Before using the geared motor, replace the blockage at the highest position with the exhaust plug to ensure that the gas is discharged from the body when the reducer is running.
2. Installation
1. The geared motor should be installed on a flat, shock-absorbing and torsion-resistant support structure.
2. Under any circumstances, it is not allowed to knock the pulley, coupling, pinion or sprocket onto the output shaft with a hammer, which will damage the bearing and shaft.
3. After installation
1. After the reducer motor is installed, check whether it is flexible. Generally, no-load test is required.
2. The geared motor cannot be overloaded.
3. The oil level of the geared motor should be checked during the whole process.
Scan the QR code to read on your phone
Address: No. 15, Century Road, Baihao Industrial Zone, Houjie Town, Dongguan City, Guangdong Province
E-mail : a0sailuntejiansudianjijin1@gdmotor.cn
Contact number：86-0769-39017383
Contact phone：86-18002601103
Scan code access
COPYRIGHT © 2021 Dongguan Silent Industry Co.,Ltd ALL RIGHTS RESERVED
