Shenzhen Huapai Communication Technology Co., Ltd.

img86-0769-39017383 img Search img
img
Homepage
/
News
/
Technical Guide
/
Reasons, prevention and elimination methods of abnormal noise in the reducer

Reasons, prevention and elimination methods of abnormal noise in the reducer

  • Author:
  • Origin:
  • Time of issue:2022-03-24 09:34
  • Pageviews：

(Summary description)1. The reducer is overloaded;
2. The load of the working machine is unbalanced;
3. Deterioration of lubricating oil;
4. The gear tooth surface is worn or the manufacturing quality is poor;
5. The bearing clearance is too large or too small; there is adhesion on the f tooth surface;
6. There are sundries in the box;

Reasons, prevention and elimination methods of abnormal noise in the reducer

(Summary description)1. The reducer is overloaded;
2. The load of the working machine is unbalanced;
3. Deterioration of lubricating oil;
4. The gear tooth surface is worn or the manufacturing quality is poor;
5. The bearing clearance is too large or too small; there is adhesion on the f tooth surface;
6. There are sundries in the box;

  • Categories:Technical Guide
  • Author:
  • Origin:
  • Time of issue:2022-03-24 09:34
  • Views:0
Information
Prevention and exclusion methods:
1. Operate according to the specification requirements;
2. Adjust the balance state;
3. Drain the deteriorated lubricating oil in the reducer, clean it and replace the qualified lubricating oil;
4. Send it to the repair shop for overhaul and replacement parts in time;
5. Adjust the bearing clearance;
6. Check and clean up;
7. Drain the oil for cleaning.

Scan the QR code to read on your phone

Previous: Causes and solutions of gear wear
Next: Routine inspections should be done when assembling the geared motor
Previous: Causes and solutions of gear wear
Next: Routine inspections should be done when assembling the geared motor

COPYRIGHT © 2021 Dongguan  Silent  Industry  Co.,Ltd ALL RIGHTS RESERVED

Search