Factors Affecting the Reversal of the Deceleration Motor
The geared motor, as a common type of motor in daily life, has a very wide range of applications. During the use of the geared motor, there may sometimes be issues with reversing. There are many factors that can lead to the reversing of the geared motor, with the main influencing factors being the following points.
Release time:
2022-04-22 18:00
www.gdmotor.cn
Reduction MotorAs a common type of motor in daily life, its applications are quite extensive. During the use of reduction motors, there may sometimes be issues with commutation. There are many factors that lead to the commutation of reduction motors, and the main influencing factors are outlined below.
1. Electromagnetic Factors
When the reduction motor is commutating, reactive voltage and commutation voltage will appear in the commutation components. The sum of these voltages is generally greater than zero, referred to as delayed commutation. During commutation, when the rear brush separates one commutator segment and moves to another adjacent commutator segment, the commutation current is not zero, and electromagnetic energy is stored in the commutation components. When the brush of the reduction motor separates from the previous commutator segment, the commutation circuit is suddenly interrupted, and the electromagnetic energy in the commutation components is released as soon as it breaks through the air, producing a spark.
2. Mechanical Factors
In terms of production, poor reduction caused by the motor's own factors is an important aspect. There are many mechanical factors, such as the flatness and roughness of the external three-dimensional commutator, as well as the perpendicularity of the external commutator to the motor shaft during disassembly. Insulation depressions between commutator segments or depressions in the commutator segments. The contact surface of the brush is not well grounded, and the brush only partially contacts the surface of the commutator. Different spring pressures on the brushes. Brushes in the brush box are too loose or too tight. The distance between each brush rod is not equal, causing some brushes to short-circuit the commutation components that are not on the geometric local line. The appearance of the commutator, etc.
3. Electrochemical Factors
During normal operation, a thin layer of brown cuprous oxide film appears on the surface of the reduction motor commutator. The theory indicates that the presence of the cuprous oxide film is a necessary prerequisite for good commutation of the motor, as the cuprous oxide film itself not only has high resistance but also adsorbs a thin layer of moisture, oxygen, and graphite powder on its surface, providing good smoothness and helping to increase the wear between the brush and the commutator.
Related News
What is the difference between brushless reduction motors and brushed reduction motors?
Brushless DC Motor (BLDC) and Brushed DC Motor have some significant differences in structure, working principle, performance, and other aspects. Here are their main differences:
How to assess the noise level and vibration characteristics of a screw-type window opener motor?
When selecting a screw-type window opener motor, its noise level and vibration characteristics are two crucial factors that directly affect the user experience and the stability of the equipment. So, how should we evaluate these two aspects?
In the field of construction, screw-type window openers are important devices for achieving automated window opening and closing, and their performance and stability are crucial. Especially in some harsh environmental conditions, such as high humidity and dusty places, the protection level of the motor becomes a key factor in ensuring the normal operation of the window opener.
What are the common faults of screw-type window opener motors?
The screw-type window opener motor may experience some common faults during long-term use. Below are some typical fault phenomena and their possible causes.
Introduction to Micro DC Gear Motors
Introduction to Micro DC Gear Motors Micro DC gear motors are a miniaturized motor system, typically consisting of a DC motor and a gearbox. Here are some related introductions to micro DC gear motors: DC Motor Section: Working Principle: The DC motor generates current by moving a conductive coil in a magnetic field, thus producing electromagnetic force to drive the motor's rotation. Structure: Micro DC motors usually adopt a separate structure, including an armature (rotating part) and an electromagnet (stator part). Types: Common types of DC motors include brushed DC motors and brushless DC motors. Brushed DC motors use brushes to connect to the armature, while brushless DC motors control current through an electronic speed controller, eliminating the need for brushes. Gearbox Section: Function: The gearbox is used to slow down the motor's output speed while increasing torque. This is crucial for applications requiring higher torque and lower speeds, such as robotic arms and camera gimbals. Structure: Gearboxes typically consist of gears that achieve the reduction ratio through different gear combinations. The reduction ratio is the ratio of input speed to output speed. Types: Common types of gearboxes include planetary gears, worm gears, and helical gears. Different types of gearboxes are suitable for different application scenarios. Applications: Micro DC gear motors are widely used in various fields, including consumer electronics (such as cameras and printers), medical devices, robotics, and automotive electronics. In these applications, micro DC gear motors are typically used to control precise movements, provide sufficient torque, and achieve efficient performance in limited spaces. Control and Drive: Micro DC gear motors usually require corresponding electronic speed controllers or controllers to precisely control rotation speed and direction. The control system can adjust the motor's output according to application needs, achieving precise position control and speed regulation. Performance Parameters: The performance parameters of micro DC gear motors include rated voltage, rated speed, rated torque, efficiency, etc. These parameters are crucial for selecting and designing motor systems. In summary, micro DC gear motors have been widely applied under the trends of miniaturization, precision, and efficiency, providing reliable driving force for many electric devices and systems.
Contact Information
Service Hotline:+86 0769-3901 7383
Mobile Phone: +86 180 0260 1103
Email: sunweihong@silentgear.cn
Factory Address: No. 15, Century Road, Baihao Industrial Zone, Houjie Town, Dongguan City, Guangdong Province
Quick Navigation
Online message
Contact Us
COPYRIGHT 2024 Dongguan Silent Industrial Co., Ltd.