Knowledge Sharing: How to Select a Deceleration Motor?

There are many types and models of reduction motors. When purchasing a motor, the process of product selection is involved, and the importance of selection is self-evident. Below, Silent Industrial will teach you how to correctly select a reduction motor.


  There are many types and models of reduction motors, and the process of selecting products is involved when purchasing motors, the importance of which is self-evident. Below, Silent Industrial will teach you how to correctly select a reduction motor?

  1. Reduction Motor Size

  When choosing gears, it is always required that the size be as small as possible, but in reality, this is a misconception in usage. In product design, it is better to leave a larger assembly space to better match the appropriate gearbox.

  2. Reduction Motor Electrical Performance

  (1) Rated Torque/Speed: In many cases, customers themselves are not clear about the actual torque required for their products, but hope for maximum torque. In fact, the following simple method can be used to measure torque: select a similar reduction motor, insert a current and voltage regulator into the circuit, and then control the speed and torque by adjusting the voltage. By comparing this data with the curve chart, you can accurately know the actual working torque and speed.

  (2) Maximum Allowable Current/Torque: Many automation products have a maximum allowable current. When the current exceeds a certain value, it can damage the electrical circuit, causing overheating, short circuits, burning, and other major issues. We usually think that the larger the torque, the better, but in reality, excessive torque can damage the driven system, causing wear and destruction of the product's mechanical structure. At the same time, excessive torque can also damage the motor and gearbox itself, leading to insufficient lifespan. If the assembly space is not restricted, choosing a low-speed motor to match a small gear ratio gearbox can achieve high reliability and long lifespan.

  3. Reduction Motor Noise

  In general, the noise we refer to is the mechanical noise of the gears, which is the sound that can be heard by the ear. If the gearbox produces a loud noise and requests noise improvement, but repeated samples still cannot solve the problem, it is actually not the noise emitted by the product itself, but caused by various reasons, such as vibrations caused by the motor's high rotation speed, resonance caused by the rigid connection between the reduction motor and the machinery, and noise caused by eccentric loads. Choosing plastic gears produces less noise than metal gears, using helical gears produces less noise than spur gears, and the metal worm and worm gear structure has a larger noise, while planetary gears also produce significant noise.

  4. Priority Direction of Product Guarantee for Reduction Motors

  It is important to clarify the direction of product guarantee and select different reduction motors based on the different usage environments. This is crucial for product selection. For example, for financial machinery, product reliability should be prioritized; for toys, product safety and environmental protection should be prioritized; for industrial machinery such as valves, product lifespan should be prioritized; and for household items, product quietness should be prioritized.

Related News


What is the difference between brushless reduction motors and brushed reduction motors?

Brushless DC Motor (BLDC) and Brushed DC Motor have some significant differences in structure, working principle, performance, and other aspects. Here are their main differences:


How to assess the noise level and vibration characteristics of a screw-type window opener motor?

When selecting a screw-type window opener motor, its noise level and vibration characteristics are two crucial factors that directly affect the user experience and the stability of the equipment. So, how should we evaluate these two aspects?


What level of motor protection is required to ensure that the screw-type window opener operates stably in harsh environments (such as high humidity and dust)?

In the field of construction, screw-type window openers are important devices for achieving automated window opening and closing, and their performance and stability are crucial. Especially in some harsh environmental conditions, such as high humidity and dusty places, the protection level of the motor becomes a key factor in ensuring the normal operation of the window opener.


What are the common faults of screw-type window opener motors?

The screw-type window opener motor may experience some common faults during long-term use. Below are some typical fault phenomena and their possible causes.


Introduction to Micro DC Gear Motors

Introduction to Micro DC Gear Motors   Micro DC gear motors are a miniaturized motor system, typically consisting of a DC motor and a gearbox. Here are some related introductions to micro DC gear motors:   DC Motor Section: Working Principle: The DC motor generates current by moving a conductive coil in a magnetic field, thus producing electromagnetic force to drive the motor's rotation. Structure: Micro DC motors usually adopt a separate structure, including an armature (rotating part) and an electromagnet (stator part). Types: Common types of DC motors include brushed DC motors and brushless DC motors. Brushed DC motors use brushes to connect to the armature, while brushless DC motors control current through an electronic speed controller, eliminating the need for brushes.   Gearbox Section: Function: The gearbox is used to slow down the motor's output speed while increasing torque. This is crucial for applications requiring higher torque and lower speeds, such as robotic arms and camera gimbals. Structure: Gearboxes typically consist of gears that achieve the reduction ratio through different gear combinations. The reduction ratio is the ratio of input speed to output speed. Types: Common types of gearboxes include planetary gears, worm gears, and helical gears. Different types of gearboxes are suitable for different application scenarios.   Applications: Micro DC gear motors are widely used in various fields, including consumer electronics (such as cameras and printers), medical devices, robotics, and automotive electronics. In these applications, micro DC gear motors are typically used to control precise movements, provide sufficient torque, and achieve efficient performance in limited spaces.   Control and Drive: Micro DC gear motors usually require corresponding electronic speed controllers or controllers to precisely control rotation speed and direction. The control system can adjust the motor's output according to application needs, achieving precise position control and speed regulation.   Performance Parameters: The performance parameters of micro DC gear motors include rated voltage, rated speed, rated torque, efficiency, etc. These parameters are crucial for selecting and designing motor systems.   In summary, micro DC gear motors have been widely applied under the trends of miniaturization, precision, and efficiency, providing reliable driving force for many electric devices and systems.