Shenzhen Huapai Communication Technology Co., Ltd.

img
/
/
/
What should be paid attention to when installing the output components of the miniature reducer?

What should be paid attention to when installing the output components of the miniature reducer?

  • Author:赛仑特实业
  • Origin:www.gdmotor.cn
  • Time of issue:2021-12-08 16:11
  • Pageviews:

(Summary description)Micro reducer is widely used in daily life. So, what should be paid attention to when installing its output components? Next, Celent Industrial will give you a brief introduction.

What should be paid attention to when installing the output components of the miniature reducer?

(Summary description)Micro reducer is widely used in daily life. So, what should be paid attention to when installing its output components? Next, Celent Industrial will give you a brief introduction.

  • Categories:Industry information
  • Author:赛仑特实业
  • Origin:www.gdmotor.cn
  • Time of issue:2021-12-08 16:11
  • Views:0
Information

Micro reducer is widely used in daily life. So, what should be paid attention to when installing its output components? Next, Celent Industrial will give you a brief introduction.

1

1. The installation of the output components of the miniature reducer adopts the press-in method, and the fine thread is used as much as possible;

2. Before installation, the matching tolerance of shaft and hole should be detected;

3. When installing various output components, beware of contact corrosion to avoid difficulty in disassembly, such as: pay attention to the lubricant during assembly;

4. The correct installation method of each output element of the miniature reducer can avoid additional radial load and axial force, and the installation accuracy should be strictly implemented in accordance with relevant standards;

5. It is forbidden to axially hit the correct installation position of the sprocket of the output element such as the pulley and the coupling;

6. Rough disassembly must be avoided, otherwise the reducer may be damaged.

The above is the relevant introduction about the installation of the output components of the miniature reducer, I hope it will be helpful to you. Celent reminds that the micro reducer should be careful to avoid rough disassembly, otherwise the machine may be damaged.

Keyword:

Scan the QR code to read on your phone